CO2 Extinguisher Refilling Machine
CO2 Extinguisher Refilling Machine in UAE
Description:
Firstly, The refilling or recharging process of a fire extinguisher involves refilling it with the fire extinguishing agent. In some cases refilling also means emptying the remaining agent and filling it again. and CO2 pumps are required to fill CO2 fire extinguishers. Filling process stops automatically when the required gas pressure is provided by the automatic closing scale assembly.
Secondly, Making sure the extinguisher is always full of the correct agent and kept in good working order, is of high importance. Refilling an extinguisher when needed is the best way ensuring it will work when you need to use it.
Thirdly, this filling machine is characterized by the ease to use, fast filling, accurate measurement, easy movement, and high-efficiency features ensure a safe and profitable filling process.
Finally, The carbon dioxide is filled under 55 bar or 825 psi high pressure in the fire extinguisher cylinder.
Features:
Power: 1.1 KW – 220 V/ 50 Hz
Refilling Speed: ≥ 3 KG/Min
Refilling Range: 1~48 KG
Weight: 53 KG
Machine Size: 530×430×430 mm
Carbon dioxide(Co2) extinguisher refilling machine is newly developed based on. It is suitable for all kinds of portable Co2 fire extinguishers. It is no need to heating and refrigerating, but can refill the Co2 fire extinguisher directly from big bottle.
Luckily, We are here in Phlox Security and Safety always make efforts to provide the highest quality and the best price of fire fighting equipment, including CO2 Extinguisher Refilling Machine in UAE
Related products
-
Fire Fighting Trailers
Features:
- Up-to 80 km/h on asphalt roads
- The pressure vessel is equipped with a mechanical safety valve
- The vessel is provided with valves for hose cleaning and pressure release after operation, preserving the residual amount of remaining powder
- The unit is provided ,with two lockers, one at each side. Each locker contains one 20 m length rubber hose
- The hoses are connected to two operating pistols that allow continuous or intermittent powder discharge
- Affords the highest extinguishing efficiency due to its special multipurpose Bavaria dry chemical powder (ABC)
-
Hydrotest Extinguishers Machine
Stationary High- and Low-Pressure testing unit, for testing of fire extinguishers and pressure units.
High-Pressure-Test
In High-Pressure with 2 testing connections to test: CO2-bottles/- cartridges and -fi re extinguishers, breathing air apparatus, diving bottles, gas-bottles.
Unit consisting of:
- 2 High-Pressure hoses (0.8 m)
- Plug-in coupling with 2 plug-in adaptors each with large or small conical CO2-thread
- Lockable valves for individual testing
- Relief valve to relieve the testing line
- Pipework made of High-Pressure Ermetho pipes
- Compressed-air driven High-Pressure pump
- Disconnect able pressure display with pressure gauge (600 bar)
- Automatic disconnection when reaching the requested test pressure by pressure gauge
-
Foam Fire Fighting System
Fire offers a wide range of Skid-Mounted Fixed Foam Systems designed for use across multiple applications around the world.
From small 300 Liter capacity Heli mixers designed for Heli-deck protection to high capacity 4000+ Liter Systems designed to protect large scale marine & industrial risks, a choice of ‘Packaged’ and ‘Bespoke’ solutions.
With optional framed versions and sun-roof models for warmer climates we can manufacture in customer-specific materials and offer a range of finishes. -
Dry Powder Fire Extinguisher Filling Machine
Dry Powder Fire Extinguisher Filling Machine is a new model improved by our factory. It can suck dry powder into the cylinder quickly by vacuum. It has several advanced features, such as small volume, easy movement, simple operation, and environmental protection. It is especially suitable for the filling, production, and maintenance of dry powder extinguisher and also suitable for filling various powder products. It is ideal equipment in the powder filling industry
Related products
-
Clean Agent Fire Suppression Systems
There are three common clean agent fire suppression systems to choose from, including FM-200, 3M™ Novec™ 1230, and Inergen Clean Agent Fire Suppression System. All systems use gases that are safe for the environment and humans, but they utilize different ways of suppressing a fire.
- The FM-200 system is stored as a liquid and vaporizes when discharged. The system displaces the oxygen around a fire, but heat absorption is its primary extinguishing capability.
- The Inergen system uses inert gases- nitrogen, argon, and carbon dioxide- to reduce the oxygen level and suppress the fire. While carbon dioxide is included, the concentration is safe for humans and the environment. Once the Inergen concentration is discharged, it returns to the atmosphere in its natural state.
- The 3M™ Novec™ 1230 system uses a liquid that is vaporized when discharged, similar to the FM-200 system. However, unlike the FM-200 which suppresses the fire by heat absorption or cooling, the 3M™ Novec™ 1230 displaces the oxygen around a fire to suppress it.
CO2 Fire Suppression Systems
If a building has rare or little occupancy, they may use a CO2 fire suppression system instead of a clean agent system. These systems are only used in buildings with very low occupancy, as carbon dioxide can result in health risks for anyone exposed, and can even be deadly. Clean agent systems are much more common, as they use gases they aren’t harmful to humans.
3 Main Parts Of The System
A clean agent fire suppression system is commonly made up of three parts: smoke detectors, the control panel, and notification devices. The smoke detectors work as usual and will detect a fire before it has time to escalate into an uncontrollable event. The smoke detector will send a signal to the control panel, which then alerts the notification devices and activates the release device to suppress the fire. The notification devices are there to warn occupants of the fire, and alert people in the area when the clean agent is about to be released.
-
Kitchen Hood Suppression System
Kitchen suppression is an automatic wet chemical extinguishing system designed to protect equipment, life and property. Industrial kitchens are a major source of fires and these suppression systems counteract that.
Kitchen suppression systems are designed, tested, and approved to provide fire protection for commercial kitchen cooking appliances, hoods, and ducts. The suppression systems consist of an agent storage tank, manual release station, an automatic releasing mechanism, and supply piping that directs the agent to nozzles strategically positioned at heat sources in the kitchen.Kitchen Hood Suppression System Work?
A fire needs three things to thrive: oxygen, heat, and fuel. Once the system detects a fire, the nozzles above the appliance will discharge wet chemicals. These wet chemicals are engineered to quickly put out fires by covering the flames and starving them of oxygen. As soon as the system trips, the gas line to the appliance will also be immediately cut off, depriving the fire of fuel.
This two-pronged approach quickly puts out a kitchen fire without affecting other cooking stations. This means that you don’t lose all of the food being prepared in your kitchen, just the food that was burned in the fire. Since fires produce a lot of smoke, the hood automatically turns on to remove the smoke from your kitchen. Kitchen hood suppression systems respond automatically to fires, which minimizes loss.
If you’re looking for a code-compliant and cost-effective Kitchen Suppression solution for your application, we’d like to help. We will tailor a solution that fits your needs, no matter your size, complexity or line of business. From new installation to retrofit, freestanding or integrated, we will configure your system specifically for its environment — with thought given to ease of expansion or future upgrade. -
Dry Powder Chemical Firefighting Systems
- Burner Fire Control manufactured Dry Chemical Systems are NOT limited by a “Selector Valve” for remote hose reels and monitors.
- Burner Fire Control patented expulsion systems enables each hose reel or nozzle to obtain chemical through independent discharge tubes giving instant discharge through pre-pressurization and a constant discharge rate on demand. With multiple discharge tubes that can be individually controlled, full or isolated discharges are possible.
- Dry Chemical Systems are in accordance with NFPA 17 Standard
- Dry Chemical System Vessels are designed and constructed in accordance to the latest ASME Section VIII, Div. 1 unfired pressure vessel code
- Dry Chemical Systems are made of materials suitable for marine environments.
- Vessels are constructed from carbon steel and applied with corrosion resistant pain system. Components are broken down to individual units prior to application of the corrosion resistant paint finish to ensure all surfaces receive the maximum protection possible.
- Systems are assembled with stainless steel, brass, and bronze hardware and fittings and these items are additionally protected applying corrosion resistant coatings to each item.
- The DCP carrier and expellant agent is nitrogen and cylinders are of DOT or ISO standard
- All Dry Chemical Systems are sold charged with the Agent potassium bicarbonate Purple-K
- Powder fluffing tube is installed in the Dry Chemical Tank
- Nitrogen cylinder valve is ‘‘Quick-Opening’’ type and is capable of being opened manually at the valve by means of hand wheel operation, or by ‘‘Quick-Opening’’ lever action (with pressure gauge)
- Nitrogen Cylinder Storage Racks are integrated parts of the skid mounted in Horizontal Positions. Nitrogen cylinders are secured with welded clamps. Nitrogen cylinders are removable from the operating position of the unit where controls for the operation are mounted.
- Guards are installed to protect the powder skids whenever skid areas may be affected by heat radiation from any risk.
- Dry Chemical Systems are specifically designed and selected to discharge the required extinguishing agent and flow time requirements
- Nozzles are specifically designed for use with dry chemical agents and selected to discharge the required extinguishing agent and flow time requirements
- Skid Welding is completed in accordance with AWS D.1.1 Structural Welding Code, Latest Edition.
-
Dry Powder Trolley
Wheeled Powder Fire Extinguisher 50KG is manufactured according to Directive 96/98/EC (MED) with modules B and D. As with portable extinguishers, wheeled units also have to comply with high standards to ensure their extinguishing capability (fire rating), quality and reliability. We at a.b.c. know how important it is to make the right choice in firefighting. Recently, a new European standard for wheeled extinguishers, EN 1866, was introduced. The a.b.c. wheeled extinguisher range has been the first in Europe to comply with this standard.
The wheeled units also carry the CE mark so the range can boast three quality guarantees: a.b.c. (ISO 9001), compliance with EN 1866 and the CE mark. The standard EN1866 defines important minimum levels of pressure retention, corrosion protection, operating temperatures and fire rating.
-
Foam Fire Fighting Trailer
Foam Trailer is a complete mobile package meeting all applicable NFPA standards consisting of a trailer constructed with frame, wheels, and axles capable of carrying the total charged weight of the trailer assembly and the foam concentrate.
Foam Trailer frame includes a tongue jack, electrical connections, NFPA 1901 lighting package (optional), reflective striping, rear mud flaps, and rear stabilizer jacks. The foam system can utilize either of two foam storage vessel designs: polyethylene tote(s), either single, dual, multiple or a rigidly constructed metal foam tank.
The foam monitor is capable of delivering up to 1000 gpm (3785 lpm) of foam solution at a pressure of 100 psi (7.0 bar). The monitor connections are up to 3.0″ (76 mm). The self-educating monitor nozzle is capable of delivering up to 1000 gpm (3785 lpm) at 100 psi (7.0 bar).
-
Foam Fire Fighting System
Fire offers a wide range of Skid-Mounted Fixed Foam Systems designed for use across multiple applications around the world.
From small 300 Liter capacity Heli mixers designed for Heli-deck protection to high capacity 4000+ Liter Systems designed to protect large scale marine & industrial risks, a choice of ‘Packaged’ and ‘Bespoke’ solutions.
With optional framed versions and sun-roof models for warmer climates we can manufacture in customer-specific materials and offer a range of finishes.