Foam Master in UAE
Description:
firstly, Foam Master is ideal for rapid deployment to flammable liquid fires & chemical spills. The foam tank is made of stainless steel, externally powder painted (yellow color), and can be operated by one person.
This unit is ideal for the protection of smaller flammable liquid hazards such as boiler rooms, oil storage loading terminals, and industrial sites.
Same in properties Foam hose reel station which used to control fires or spills of flammable or combustible liquids https://phloxuae.com/product/foam-hose-reel-station/.
Features:
Specifications:
At last, In Phlox we provide the highest quality and the best price of foam master in UAE.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarm supplier based in Sharjah, UAE. We also install fire-prevention alarms and systems and we have a wide range of products for different fire-preventive measures needed. also, we provide our expertise and knowledge in recommending the best fire safety practices for your establishment that will guarantee everyone’s safety. We are one of UAE’s leading fire-prevention companies and we attain this by supplying high-grade and quality products.
Kitchen suppression is an automatic wet chemical extinguishing system designed to protect equipment, life and property. Industrial kitchens are a major source of fires and these suppression systems counteract that.
Kitchen suppression systems are designed, tested, and approved to provide fire protection for commercial kitchen cooking appliances, hoods, and ducts. The suppression systems consist of an agent storage tank, manual release station, an automatic releasing mechanism, and supply piping that directs the agent to nozzles strategically positioned at heat sources in the kitchen.
Kitchen Hood Suppression System Work?
A fire needs three things to thrive: oxygen, heat, and fuel. Once the system detects a fire, the nozzles above the appliance will discharge wet chemicals. These wet chemicals are engineered to quickly put out fires by covering the flames and starving them of oxygen. As soon as the system trips, the gas line to the appliance will also be immediately cut off, depriving the fire of fuel.
This two-pronged approach quickly puts out a kitchen fire without affecting other cooking stations. This means that you don’t lose all of the food being prepared in your kitchen, just the food that was burned in the fire. Since fires produce a lot of smoke, the hood automatically turns on to remove the smoke from your kitchen. Kitchen hood suppression systems respond automatically to fires, which minimizes loss.
If you’re looking for a code-compliant and cost-effective Kitchen Suppression solution for your application, we’d like to help. We will tailor a solution that fits your needs, no matter your size, complexity or line of business. From new installation to retrofit, freestanding or integrated, we will configure your system specifically for its environment — with thought given to ease of expansion or future upgrade.
Wheeled Powder Fire Extinguisher 50KG is manufactured according to Directive 96/98/EC (MED) with modules B and D. As with portable extinguishers, wheeled units also have to comply with high standards to ensure their extinguishing capability (fire rating), quality and reliability. We at a.b.c. know how important it is to make the right choice in firefighting. Recently, a new European standard for wheeled extinguishers, EN 1866, was introduced. The a.b.c. wheeled extinguisher range has been the first in Europe to comply with this standard.
The wheeled units also carry the CE mark so the range can boast three quality guarantees: a.b.c. (ISO 9001), compliance with EN 1866 and the CE mark. The standard EN1866 defines important minimum levels of pressure retention, corrosion protection, operating temperatures and fire rating.
Pneumatic clamping device for CO2- and powder extinguishers with pneumatic clamping cylinder.
TECHNICAL DATA model PT (No. 100 450) | |
Dimensions (l x w x h) | approx. 300 x 850 x 1000 mm |
Clamping surface (Ø) | 80 – 220 mm |
Compressed-air | 6 – 8 bar |
Color | blue |
Optional available at extra charge:
There are three common clean agent fire suppression systems to choose from, including FM-200, 3M™ Novec™ 1230, and Inergen Clean Agent Fire Suppression System. All systems use gases that are safe for the environment and humans, but they utilize different ways of suppressing a fire.
CO2 Fire Suppression Systems
If a building has rare or little occupancy, they may use a CO2 fire suppression system instead of a clean agent system. These systems are only used in buildings with very low occupancy, as carbon dioxide can result in health risks for anyone exposed, and can even be deadly. Clean agent systems are much more common, as they use gases they aren’t harmful to humans.
3 Main Parts Of The System
A clean agent fire suppression system is commonly made up of three parts: smoke detectors, the control panel, and notification devices. The smoke detectors work as usual and will detect a fire before it has time to escalate into an uncontrollable event. The smoke detector will send a signal to the control panel, which then alerts the notification devices and activates the release device to suppress the fire. The notification devices are there to warn occupants of the fire, and alert people in the area when the clean agent is about to be released.
Burner Fire Control has been again selected to provide its 200 Gallon Compressed Air Foam Trailer Unit for emergency response for operations in the Arabic Gulf countries, Ghana, Africa. The CAFS 200 HD Trailer System provides self-contained and mobile capabilities to address potential surface hazards within the operations and surrounding areas. The Unit was shipped with Class A and B foam concentrate for mitigation of potential structural and hydrocarbon hazards.
There are three common clean agent fire suppression systems to choose from, including FM-200, 3M™ Novec™ 1230, and Inergen Clean Agent Fire Suppression System. All systems use gases that are safe for the environment and humans, but they utilize different ways of suppressing a fire.
CO2 Fire Suppression Systems
If a building has rare or little occupancy, they may use a CO2 fire suppression system instead of a clean agent system. These systems are only used in buildings with very low occupancy, as carbon dioxide can result in health risks for anyone exposed, and can even be deadly. Clean agent systems are much more common, as they use gases they aren’t harmful to humans.
3 Main Parts Of The System
A clean agent fire suppression system is commonly made up of three parts: smoke detectors, the control panel, and notification devices. The smoke detectors work as usual and will detect a fire before it has time to escalate into an uncontrollable event. The smoke detector will send a signal to the control panel, which then alerts the notification devices and activates the release device to suppress the fire. The notification devices are there to warn occupants of the fire, and alert people in the area when the clean agent is about to be released.
Features:
Fire offers a wide range of Skid-Mounted Fixed Foam Systems designed for use across multiple applications around the world.
From small 300 Liter capacity Heli mixers designed for Heli-deck protection to high capacity 4000+ Liter Systems designed to protect large scale marine & industrial risks, a choice of ‘Packaged’ and ‘Bespoke’ solutions.
With optional framed versions and sun-roof models for warmer climates we can manufacture in customer-specific materials and offer a range of finishes.
Stationary High- and Low-Pressure testing unit, for testing of fire extinguishers and pressure units.
High-Pressure-Test
In High-Pressure with 2 testing connections to test: CO2-bottles/- cartridges and -fi re extinguishers, breathing air apparatus, diving bottles, gas-bottles.
Unit consisting of:
PHLOX Security & Safety Equip. LLC
P.O. Box : 65433
Shed No. 4, Industrial Area 13
Sharjah, United Arab Emirates
PHLOX Security & Safety Equip L L C - Branch 01
Shop No. 1, Rashideya 3
Ajman, United Arab Emirates
We, PHLOX SECURITY & SAFETY EQUIP. LLC are glad to introduce ourselves as a supplier and we do installation of Fire Fighting and Fire Alarm materials and we are primarily located in Sharjah.
P.O. Box: 65433 ,Shed No. 4, Industrial Area 13 , Sharjah, United Arab Emirates