NEW!
Addressable And Conventional Sounder Flasher Base
SDS91K
Product Features:
Use two M4 screws to fix the SDS91K base via the two
elliptic screw holes,then connect the bus cables with the
terminal 1&3, and connect the DC24V power cables with the
terminal 2&4 (2 connected with positive,and 4 with
negative.1.5mm2 or above fire cable for the power input is
recommended.), finally twist the main body onto the base.
Related products
-
Addressable Smoke Detector
Description:
There are certain situations that a smoke detector would not be enough in fire management and safety. In instances of smoldering fires, addressable smoke detectors would be the best choice. This smoke detector would be ideal for dense smokes of fires that were produced from the burning of soft furnishing, plastic, foam, or similar materials that easily smolders.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. In terms of fire safety and prevention, we are a leading expert and we also install fire-prevention alarms and systems. We have a wide range of products for different fire-preventive measures needed, and we, specifically, offer the GST DC-9103E Conventional Rate of Rise and Fixed Temperature Heat Detector.
The GST DC-9103E is a new generation product of GST that works stably by being fixed with a highly reliable fire judging program. It is also built with a microprocessor enabling a compact design. When detecting fire signals, it can change its own current to transmit the proper signal to the fire alarm control panel or the location of the addressable zone monitor unit. This smoke detector will keep illuminating fire LED until it is reset by its own system ensuring that the signal would be well received by people within the vicinity of the hazard.
Other unique features of the model are its programmable classes enabling up to 3 classes of program. It also has a reed switch testing. Its design is sleek and aesthetically pleasing allowing a low-profile and unobtrusive design that can easily complement any modern building. It is also electronically addressed and it comes with a remote indicator as its output terminal. The LED contained in the smoke detector also allows 360O viewing and smoke detection. Lastly, the product complies with EN 54-5. -
Landing Valves
Description:
Landing Valves are suitable for installation on dry riser in building for firefighting protection. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 Bar.
Disc facing rubber is replaceable type
Hand wheel is BLACK painted and body is RED
-
Foam Extinguishers
Description:
Foam Fire Extinguishers are effective on class A & B fire.
AFFF is an extinguishing agent which seals the burning surface against ignition.
All Extinguishers are coated internally for optimal protection against rust and corrosion.
A foam extinguisher is good for general use, suitable for the majority of business premises.
The valve provided with safety release valve to release the excess pressure.
-
Water Extinguishers
Description:
Water Fire Extinguishers are effective on class A fire.
All Extinguishers are coated internally for optimal protection against rust and corrosion.
The valve is provided with safety release valve to release the excess pressure.
Cylinders of different capacity can be supplied upon request.
Water Fire Extinguishers are cost-effective
Related products
-
Central Monitoring Battery System
Description:
Reliable and easy-to-operate central battery system constructed in accordance with the requirements.
The system monitors each output circuit individually and with the use of address modules – each luminaire.
- LCD display with easy-to-use menu
- Automatic test performing
- Automatic detection and adding luminaires to the system
- Monitoring of each luminaire
- Monitoring of each circuit
- Programming and configuration of the luminaires directly from the central unit
-
Addressable Manual Call Point
Description:
- Optional Back box for surface mount
- Re-settable (non-Breaking glass) with special key
- Easy 1st and 2nd Fix Installation
- Semi Flush or surface mount installation
- Pleasing Style design
- Protection Rating: IP55
- Operating Voltage: 24V DC
- Operating Current:
- Stand by Current: 0
- Alarm Current: 30mA
-
CO2 Fire Extinguishers
Description:
There are two commonly used fire extinguishers in the market. Part of fire safety and precaution is
knowing which fire extinguisher would be best for the possible fires that can occur in an establishment.
Carbon Dioxide extinguishers are primarily made of pressurized non-flammable carbon dioxide gas. CO2 extinguishers are easily recognizable since they have hard horns and does not have a pressure gauge. The extinguisher also contains a flexible hose attached to its hard horns. The pressure inside the cannister of the extinguisher is so high that dry ice may form when using the extinguisher. It also contains a valve with a safety release pressure to prevent any bursting of cylinders in situations of fires involving high temperatures. CO2 fire extinguishers should only be used for Class B fires, fires caused my flammable liquid, and Class C fires, fire that were triggered by faulty electrical wiring or circuitry. It is ideal to use in multi-risk fires. The main ingredient of the extinguisher, CO2, will extinguish the flames by displacing oxygen. The pressurized CO2 gas is also cold which also acts as a coolant to the burning fuels. It is important to note that CO2 extinguishers SHOULD NOT BE USED for Class A fires since the CO2 may not be enough to displace oxygen since materials that causes Class A fires can smolder and re-ignite. Laboratories, kitchens, mechanical rooms, rooms with flammable liquids are some establishments should be equipped with a CO2 extinguisher.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We are a leading expert in fire-safety systems and installation that would guarantee the safety of your establishment. We have a wide range of products for different fire-preventive measures needed, and we have the best and cost-effective CO2 extinguishers in UAE. -
Addressable Smoke Detector
Description:
There are certain situations that a smoke detector would not be enough in fire management and safety. In instances of smoldering fires, addressable smoke detectors would be the best choice. This smoke detector would be ideal for dense smokes of fires that were produced from the burning of soft furnishing, plastic, foam, or similar materials that easily smolders.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. In terms of fire safety and prevention, we are a leading expert and we also install fire-prevention alarms and systems. We have a wide range of products for different fire-preventive measures needed, and we, specifically, offer the GST DC-9103E Conventional Rate of Rise and Fixed Temperature Heat Detector.
The GST DC-9103E is a new generation product of GST that works stably by being fixed with a highly reliable fire judging program. It is also built with a microprocessor enabling a compact design. When detecting fire signals, it can change its own current to transmit the proper signal to the fire alarm control panel or the location of the addressable zone monitor unit. This smoke detector will keep illuminating fire LED until it is reset by its own system ensuring that the signal would be well received by people within the vicinity of the hazard.
Other unique features of the model are its programmable classes enabling up to 3 classes of program. It also has a reed switch testing. Its design is sleek and aesthetically pleasing allowing a low-profile and unobtrusive design that can easily complement any modern building. It is also electronically addressed and it comes with a remote indicator as its output terminal. The LED contained in the smoke detector also allows 360O viewing and smoke detection. Lastly, the product complies with EN 54-5. -
Fire Hose Reels
Description:
Fire hose reels are designed and manufactured to BSEN 671-1:2001. The hose reels are manufactured from 1.5mm thick ribbed side plates for increased strength and coated with UV resistant Epoxy Powder Coating in Red, Stainless. The reel plate edge is rounded to prevent sharp edges. Hose made from natural rubber reinforced by double layer yarns. The outer and inner surfaces of the hose are smooth and seamless and can be withstand a pressure up to 20 bar.
The test pressure of the hose reel is 30 bar. The bursting pressure of the hose reel is 60 bar and above. The flexibility of the hose reel is high so that can be used without alterations for mounting with inlet to left or right of the reel.
The hose reel is fitted with specially designed glandless type drip proof seals which have been subjected to hydrostatic test pressure of 20 bar.
Steel hose reels can be supplied on request.