Emergency Lights – UL Listed
Emergency Lights – UL Listed in UAE
Description:
In order to be compliant with emergency lighting requirements, there needs to be enough emergency lighting for people to be able to leave the premises in the event of an emergency. and that is Emergency Lighting Requirements. as emergency exits need emergency exit lights above the door, as well as signage to the emergency exit.
Emergency Lights – UL Listed , a surface mount emergency luminaire, is based on LED technology.
is the solution which blends into the surroundings by its streamlined and coordinated design and is well-suited for non-maintained emergency luminaires located in dry areas.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarm supplier based in Sharjah, UAE. In terms of fire safety and prevention, we are a leading expert and we also install fire-prevention alarms and systems.
We have a wide range of products for different fire-preventive measures needed.
Part of our product offerings is affordable and cost-efficient Emergency Lights – Usingle-tube
Features:
- Fluorescent single tube emergency light
- Working Voltage: AC220V±10%
- Battery: Nickel cadmium battery 3.6V 1.5Ah / 2.4V 4.0Ah
- Emergency duration time: 3 hours
- Working temperature: -10°C-55°C
- Working Humidity: 10% – 90%
- 1x8W T5 Fluorescent tube
- Product Size: 34. 6×10.6×7.9cm
- High brightness Energy saving
- Reliable and safety Easy installation and maintenance 24 hours charging time Battery overcharge & discharge protection Non-maintain operation.
- Based on LED technology and corrosion resistant.
In Phlox Security and Safety, We provide the highest quality and the best price of Emergency Lights – UL Listed and all firefighting equipment in UAE.
Related products
-
OS & Y Gate Valve
Description:
OS&Y gate valves operate by opening and closing via a gate, which lowers into or rises out of the valve.
Valve Standard: Conforms to AWWA C515/ BS5163
Working Pressure: 21 Bars/300PSI
Fusion Bonded Epoxy Coated Interior and Exterior RAL 3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
-
CO2 Fire Extinguishers
Description:
There are two commonly used fire extinguishers in the market. Part of fire safety and precaution is
knowing which fire extinguisher would be best for the possible fires that can occur in an establishment.
Carbon Dioxide extinguishers are primarily made of pressurized non-flammable carbon dioxide gas. CO2 extinguishers are easily recognizable since they have hard horns and does not have a pressure gauge. The extinguisher also contains a flexible hose attached to its hard horns. The pressure inside the cannister of the extinguisher is so high that dry ice may form when using the extinguisher. It also contains a valve with a safety release pressure to prevent any bursting of cylinders in situations of fires involving high temperatures. CO2 fire extinguishers should only be used for Class B fires, fires caused my flammable liquid, and Class C fires, fire that were triggered by faulty electrical wiring or circuitry. It is ideal to use in multi-risk fires. The main ingredient of the extinguisher, CO2, will extinguish the flames by displacing oxygen. The pressurized CO2 gas is also cold which also acts as a coolant to the burning fuels. It is important to note that CO2 extinguishers SHOULD NOT BE USED for Class A fires since the CO2 may not be enough to displace oxygen since materials that causes Class A fires can smolder and re-ignite. Laboratories, kitchens, mechanical rooms, rooms with flammable liquids are some establishments should be equipped with a CO2 extinguisher.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We are a leading expert in fire-safety systems and installation that would guarantee the safety of your establishment. We have a wide range of products for different fire-preventive measures needed, and we have the best and cost-effective CO2 extinguishers in UAE. -
Water Extinguishers
Description:
Water Fire Extinguishers are effective on class A fire.
All Extinguishers are coated internally for optimal protection against rust and corrosion.
The valve is provided with safety release valve to release the excess pressure.
Cylinders of different capacity can be supplied upon request.
Water Fire Extinguishers are cost-effective
-
Protector Deluge Valves
Description:
The protector model P Deluge Valves is a quick opening hydraulically operated valve.
The valve may be actually manually (at the value location or remotely), hydraulically through the use of a wet pilot sprinkler, or electric type detector and/or electric control stations to actuate
Related products
-
Landing Valves
Description:
Landing Valves are suitable for installation on dry riser in building for firefighting protection. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 Bar.
Disc facing rubber is replaceable type
Hand wheel is BLACK painted and body is RED
-
Water Extinguishers
Description:
Water Fire Extinguishers are effective on class A fire.
All Extinguishers are coated internally for optimal protection against rust and corrosion.
The valve is provided with safety release valve to release the excess pressure.
Cylinders of different capacity can be supplied upon request.
Water Fire Extinguishers are cost-effective
-
Check Valves
Description:
A check valve is probably in the discharge line of the pump.
It allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction.
Valve Standard: Conforms to AWWA C508, Clear waterway
Working Pressure: 21 Bars/300PSI
Fusion bonded epoxy coated RAL3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
-
Dry Powder Extinguishers
Description:
Fire safety and precaution is more than just installing fire extinguishers in your establishment. True fire preventive measure entails knowing which fire extinguisher is more suitable for your building. Having this particular knowledge maximizes the safety of everyone and can save multiple lives in the process. Dry Powder Extinguishers primarily contain the chemical monoammonium phosphate which is an extinguishing agent that can easily spread dousing over the flames in a split of time. Dry powder extinguishers are suitable for Class A, B, and C fires. Class A fires are those containing ordinary combustible materials such as cloth, wood, paper, and plastics. Class B fires are fires caused by flammable liquids such as grease, paint, and solvent. Class C fires are used are fires due to flammable gasses such as butane and methane. Dry powder extinguishers can be also used to extinguish fires due to live electrical wiring or equipment.
But apart from knowing what specific extinguisher should be used for a specific fire, it is important to know the external hazards as well. For example, it is not recommended to use dry powder extinguishers in enclosed spaces since it can be easily be inhaled by the people within the vicinity. Still confused? Do not worry PHLOX Security & Safety Equip. LLC is here and got you covered.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We also install fire-prevention alarms and systems and we have a wide range of products for different fire-preventive measures needed. We also provide our expertise and knowledge in recommending the best fire safety practices for your establishment that will guarantee everyone’s safety. We are one of UAE’s leading fire-prevention company and we attain this through supplying high-grade and quality products including dry powder extinguishers in the UAE. -
Wet Chemicals
Description:
Wet Chemical Extinguishers are effective on class A & F fires.
All extinguishers have been coated internally for optimum protection against rust and corrosion.
Non-toxic, non-corrosive, non-irritant and is harmless to humans and animals.
Contains No halogens, CFC’s or toxic products.
Wet Chemical extinguishers are manufactured in accordance with the requirements of International Standards.
-
OS & Y Gate Valve
Description:
OS&Y gate valves operate by opening and closing via a gate, which lowers into or rises out of the valve.
Valve Standard: Conforms to AWWA C515/ BS5163
Working Pressure: 21 Bars/300PSI
Fusion Bonded Epoxy Coated Interior and Exterior RAL 3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem