Fire Fighting Trailers
Fire Fighting Trailers in UAE
fire trailers are a mobile supplement to stationary extinguishing systems. They are ready for quick and flexible use and reduce the need for personnel within the area of risk.
Features:
- Up-to 80 km/h on asphalt roads
- The pressure vessel is equipped with a mechanical safety valve
- The vessel is provided with valves for hose cleaning and pressure release after operation, preserving the residual amount of remaining powder
- The unit is provided ,with two lockers, one at each side. Each locker contains one 20 m length rubber hose
- The hoses are connected to two operating pistols that allow continuous or intermittent powder discharge
- Affords the highest extinguishing efficiency due to its special multipurpose Bavaria dry chemical powder (ABC)
Finally, we always in Phlox security and safety provide the highest quality and the best price for Fire Fighting Trailers in UAE.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarm supplier based in Sharjah, UAE. We also install fire-prevention alarms and systems and we have a wide range of products for different fire-preventive measures needed. also, we provide our expertise and knowledge in recommending the best fire safety practices for your establishment that will guarantee everyone’s safety.
Related products
-
Clean Agent Fire Suppression Systems
There are three common clean agent fire suppression systems to choose from, including FM-200, 3M™ Novec™ 1230, and Inergen Clean Agent Fire Suppression System. All systems use gases that are safe for the environment and humans, but they utilize different ways of suppressing a fire.
- The FM-200 system is stored as a liquid and vaporizes when discharged. The system displaces the oxygen around a fire, but heat absorption is its primary extinguishing capability.
- The Inergen system uses inert gases- nitrogen, argon, and carbon dioxide- to reduce the oxygen level and suppress the fire. While carbon dioxide is included, the concentration is safe for humans and the environment. Once the Inergen concentration is discharged, it returns to the atmosphere in its natural state.
- The 3M™ Novec™ 1230 system uses a liquid that is vaporized when discharged, similar to the FM-200 system. However, unlike the FM-200 which suppresses the fire by heat absorption or cooling, the 3M™ Novec™ 1230 displaces the oxygen around a fire to suppress it.
CO2 Fire Suppression Systems
If a building has rare or little occupancy, they may use a CO2 fire suppression system instead of a clean agent system. These systems are only used in buildings with very low occupancy, as carbon dioxide can result in health risks for anyone exposed, and can even be deadly. Clean agent systems are much more common, as they use gases they aren’t harmful to humans.
3 Main Parts Of The System
A clean agent fire suppression system is commonly made up of three parts: smoke detectors, the control panel, and notification devices. The smoke detectors work as usual and will detect a fire before it has time to escalate into an uncontrollable event. The smoke detector will send a signal to the control panel, which then alerts the notification devices and activates the release device to suppress the fire. The notification devices are there to warn occupants of the fire, and alert people in the area when the clean agent is about to be released.
-
Clamping Device
Pneumatic clamping device for CO2- and powder extinguishers with pneumatic clamping cylinder.
TECHNICAL DATA model PT (No. 100 450) Dimensions (l x w x h) approx. 300 x 850 x 1000 mm Clamping surface (Ø) 80 – 220 mm Compressed-air 6 – 8 bar Color blue Optional available at extra charge:
- Equipped with adjustable clamping pressure (used for powder extinguisher)
-
Foam Hose Reel Station
Foam hose reel station is a self-contained unit that relies only on water flow and pressure to place the system into operation. It is designed to be installed in a fixed location such as processing, storage or handling areas where it is used to control fires or spills of flammable or combustible liquids. The unit is constructed in such a manner that one person may operate it to its full potential with the speed and effectiveness in an emergency situation where foam is required.
-
CAFS Trailer System
Burner Fire Control has been again selected to provide its 200 Gallon Compressed Air Foam Trailer Unit for emergency response for operations in the Arabic Gulf countries, Ghana, Africa. The CAFS 200 HD Trailer System provides self-contained and mobile capabilities to address potential surface hazards within the operations and surrounding areas. The Unit was shipped with Class A and B foam concentrate for mitigation of potential structural and hydrocarbon hazards.
Related products
-
Foam Hose Reel Station
Foam hose reel station is a self-contained unit that relies only on water flow and pressure to place the system into operation. It is designed to be installed in a fixed location such as processing, storage or handling areas where it is used to control fires or spills of flammable or combustible liquids. The unit is constructed in such a manner that one person may operate it to its full potential with the speed and effectiveness in an emergency situation where foam is required.
-
Foam Fire Fighting System
Fire offers a wide range of Skid-Mounted Fixed Foam Systems designed for use across multiple applications around the world.
From small 300 Liter capacity Heli mixers designed for Heli-deck protection to high capacity 4000+ Liter Systems designed to protect large scale marine & industrial risks, a choice of ‘Packaged’ and ‘Bespoke’ solutions.
With optional framed versions and sun-roof models for warmer climates we can manufacture in customer-specific materials and offer a range of finishes. -
Kitchen Hood Suppression System
Kitchen suppression is an automatic wet chemical extinguishing system designed to protect equipment, life and property. Industrial kitchens are a major source of fires and these suppression systems counteract that.
Kitchen suppression systems are designed, tested, and approved to provide fire protection for commercial kitchen cooking appliances, hoods, and ducts. The suppression systems consist of an agent storage tank, manual release station, an automatic releasing mechanism, and supply piping that directs the agent to nozzles strategically positioned at heat sources in the kitchen.Kitchen Hood Suppression System Work?
A fire needs three things to thrive: oxygen, heat, and fuel. Once the system detects a fire, the nozzles above the appliance will discharge wet chemicals. These wet chemicals are engineered to quickly put out fires by covering the flames and starving them of oxygen. As soon as the system trips, the gas line to the appliance will also be immediately cut off, depriving the fire of fuel.
This two-pronged approach quickly puts out a kitchen fire without affecting other cooking stations. This means that you don’t lose all of the food being prepared in your kitchen, just the food that was burned in the fire. Since fires produce a lot of smoke, the hood automatically turns on to remove the smoke from your kitchen. Kitchen hood suppression systems respond automatically to fires, which minimizes loss.
If you’re looking for a code-compliant and cost-effective Kitchen Suppression solution for your application, we’d like to help. We will tailor a solution that fits your needs, no matter your size, complexity or line of business. From new installation to retrofit, freestanding or integrated, we will configure your system specifically for its environment — with thought given to ease of expansion or future upgrade. -
CAFS Trailer System
Burner Fire Control has been again selected to provide its 200 Gallon Compressed Air Foam Trailer Unit for emergency response for operations in the Arabic Gulf countries, Ghana, Africa. The CAFS 200 HD Trailer System provides self-contained and mobile capabilities to address potential surface hazards within the operations and surrounding areas. The Unit was shipped with Class A and B foam concentrate for mitigation of potential structural and hydrocarbon hazards.
-
Dry Powder Trolley
Wheeled Powder Fire Extinguisher 50KG is manufactured according to Directive 96/98/EC (MED) with modules B and D. As with portable extinguishers, wheeled units also have to comply with high standards to ensure their extinguishing capability (fire rating), quality and reliability. We at a.b.c. know how important it is to make the right choice in firefighting. Recently, a new European standard for wheeled extinguishers, EN 1866, was introduced. The a.b.c. wheeled extinguisher range has been the first in Europe to comply with this standard.
The wheeled units also carry the CE mark so the range can boast three quality guarantees: a.b.c. (ISO 9001), compliance with EN 1866 and the CE mark. The standard EN1866 defines important minimum levels of pressure retention, corrosion protection, operating temperatures and fire rating.
-
Clamping Device
Pneumatic clamping device for CO2- and powder extinguishers with pneumatic clamping cylinder.
TECHNICAL DATA model PT (No. 100 450) Dimensions (l x w x h) approx. 300 x 850 x 1000 mm Clamping surface (Ø) 80 – 220 mm Compressed-air 6 – 8 bar Color blue Optional available at extra charge:
- Equipped with adjustable clamping pressure (used for powder extinguisher)