Fire Fighting Trailers
Fire Fighting Trailers in UAE
fire trailers are a mobile supplement to stationary extinguishing systems. They are ready for quick and flexible use and reduce the need for personnel within the area of risk.
Features:
- Up-to 80 km/h on asphalt roads
- The pressure vessel is equipped with a mechanical safety valve
- The vessel is provided with valves for hose cleaning and pressure release after operation, preserving the residual amount of remaining powder
- The unit is provided ,with two lockers, one at each side. Each locker contains one 20 m length rubber hose
- The hoses are connected to two operating pistols that allow continuous or intermittent powder discharge
- Affords the highest extinguishing efficiency due to its special multipurpose Bavaria dry chemical powder (ABC)
Finally, we always in Phlox security and safety provide the highest quality and the best price for Fire Fighting Trailers in UAE.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarm supplier based in Sharjah, UAE. We also install fire-prevention alarms and systems and we have a wide range of products for different fire-preventive measures needed. also, we provide our expertise and knowledge in recommending the best fire safety practices for your establishment that will guarantee everyone’s safety.
Related products
-
Hydrotest Extinguishers Machine
Stationary High- and Low-Pressure testing unit, for testing of fire extinguishers and pressure units.
High-Pressure-Test
In High-Pressure with 2 testing connections to test: CO2-bottles/- cartridges and -fi re extinguishers, breathing air apparatus, diving bottles, gas-bottles.
Unit consisting of:
- 2 High-Pressure hoses (0.8 m)
- Plug-in coupling with 2 plug-in adaptors each with large or small conical CO2-thread
- Lockable valves for individual testing
- Relief valve to relieve the testing line
- Pipework made of High-Pressure Ermetho pipes
- Compressed-air driven High-Pressure pump
- Disconnect able pressure display with pressure gauge (600 bar)
- Automatic disconnection when reaching the requested test pressure by pressure gauge
-
Dry Powder Chemical Firefighting Systems
- Burner Fire Control manufactured Dry Chemical Systems are NOT limited by a “Selector Valve” for remote hose reels and monitors.
- Burner Fire Control patented expulsion systems enables each hose reel or nozzle to obtain chemical through independent discharge tubes giving instant discharge through pre-pressurization and a constant discharge rate on demand. With multiple discharge tubes that can be individually controlled, full or isolated discharges are possible.
- Dry Chemical Systems are in accordance with NFPA 17 Standard
- Dry Chemical System Vessels are designed and constructed in accordance to the latest ASME Section VIII, Div. 1 unfired pressure vessel code
- Dry Chemical Systems are made of materials suitable for marine environments.
- Vessels are constructed from carbon steel and applied with corrosion resistant pain system. Components are broken down to individual units prior to application of the corrosion resistant paint finish to ensure all surfaces receive the maximum protection possible.
- Systems are assembled with stainless steel, brass, and bronze hardware and fittings and these items are additionally protected applying corrosion resistant coatings to each item.
- The DCP carrier and expellant agent is nitrogen and cylinders are of DOT or ISO standard
- All Dry Chemical Systems are sold charged with the Agent potassium bicarbonate Purple-K
- Powder fluffing tube is installed in the Dry Chemical Tank
- Nitrogen cylinder valve is ‘‘Quick-Opening’’ type and is capable of being opened manually at the valve by means of hand wheel operation, or by ‘‘Quick-Opening’’ lever action (with pressure gauge)
- Nitrogen Cylinder Storage Racks are integrated parts of the skid mounted in Horizontal Positions. Nitrogen cylinders are secured with welded clamps. Nitrogen cylinders are removable from the operating position of the unit where controls for the operation are mounted.
- Guards are installed to protect the powder skids whenever skid areas may be affected by heat radiation from any risk.
- Dry Chemical Systems are specifically designed and selected to discharge the required extinguishing agent and flow time requirements
- Nozzles are specifically designed for use with dry chemical agents and selected to discharge the required extinguishing agent and flow time requirements
- Skid Welding is completed in accordance with AWS D.1.1 Structural Welding Code, Latest Edition.
-
CO2 Extinguisher Refilling Machine
Power: 1.1 KW – 220 V/ 50 Hz
Refilling Speed: ≥ 3 KG/Min
Refilling Range: 1~48 KG
Weight: 53 KG
Machine Size: 530×430×430 mm
Carbon dioxide(Co2) extinguisher refilling machine is newly developed based on. It is suitable for all kinds of portable Co2 fire extinguishers. It is no need to heating and refrigerating, but can refill the Co2 fire extinguisher directly from big bottle.
-
CAFS Trailer System
Burner Fire Control has been again selected to provide its 200 Gallon Compressed Air Foam Trailer Unit for emergency response for operations in the Arabic Gulf countries, Ghana, Africa. The CAFS 200 HD Trailer System provides self-contained and mobile capabilities to address potential surface hazards within the operations and surrounding areas. The Unit was shipped with Class A and B foam concentrate for mitigation of potential structural and hydrocarbon hazards.
Related products
-
Clamping Device
Pneumatic clamping device for CO2- and powder extinguishers with pneumatic clamping cylinder.
TECHNICAL DATA model PT (No. 100 450) Dimensions (l x w x h) approx. 300 x 850 x 1000 mm Clamping surface (Ø) 80 – 220 mm Compressed-air 6 – 8 bar Color blue Optional available at extra charge:
- Equipped with adjustable clamping pressure (used for powder extinguisher)
-
Foam Fire Fighting Trailer
Foam Trailer is a complete mobile package meeting all applicable NFPA standards consisting of a trailer constructed with frame, wheels, and axles capable of carrying the total charged weight of the trailer assembly and the foam concentrate.
Foam Trailer frame includes a tongue jack, electrical connections, NFPA 1901 lighting package (optional), reflective striping, rear mud flaps, and rear stabilizer jacks. The foam system can utilize either of two foam storage vessel designs: polyethylene tote(s), either single, dual, multiple or a rigidly constructed metal foam tank.
The foam monitor is capable of delivering up to 1000 gpm (3785 lpm) of foam solution at a pressure of 100 psi (7.0 bar). The monitor connections are up to 3.0″ (76 mm). The self-educating monitor nozzle is capable of delivering up to 1000 gpm (3785 lpm) at 100 psi (7.0 bar).
-
Fire Fighting Hydrant and Monitor
Water hydrant mounted on the pipe. Industrial safety equipment for extinguishing fire. Worker standing with monitor on background. Water supply industry or refinery plant extinguishing accessories. Fire protection equipment for oil and gas refinery factory. Water supply chain mounted on tube, mounted on monitor monitor, fixing water pipes and accessories.
-
Foam Cabinet
Foam Cabinet is highly effective product for Gas Stations, Petrochemical Factories, Industrial Facilities, Warehouses and generally for all areas that protection is required due to fire Classes A and B.
- High Rates on A and B Fire Classes.
- Ergonomic design for easy use by one Operator.
- The top of the Cabinet is designed for outdoor mounting.
- Environmentally Friendly Foam.
Specifications & Contents
- Construction material: Galvanized Steel 1.2mm Electrostatic Paint RAL3000
- Hose Reel with arm Bracket
- Stainless Steel Pipe 2″ for Water Supply
- Brass Angle Valve 2″
- Foam Mixer with Flow rate 400lt / min with Aluminum Storz Couplings 2″
- Foam Suction Hose with Filter made of a rigid material.
- Foam nozzle 2″ with Aluminum Storz Couplings 2″.
- High Quality Hose 2 “, 30m, WP: 8Bar bounded with Aluminum Storz couplings 2”
- Two Foam Canisters 25lt
-
Foam Master
Foam Master ideal for rapid deployment to flammable liquid fires & chemical spills. Foam tank made of stainless steel, externally powder painted (yellow color), and can be operated by one person.
Features
- Ideal for rapid deployment to flammable liquid fires & chemical spills.
- Externally powder painted (yellow color)
- Foam tank made of stainless steel.
- Can be operated by one person.
Specifications
-
- Product: Foam Master
- Capacity: 150, 200 and 300 liters
-
Kitchen Hood Suppression System
Kitchen suppression is an automatic wet chemical extinguishing system designed to protect equipment, life and property. Industrial kitchens are a major source of fires and these suppression systems counteract that.
Kitchen suppression systems are designed, tested, and approved to provide fire protection for commercial kitchen cooking appliances, hoods, and ducts. The suppression systems consist of an agent storage tank, manual release station, an automatic releasing mechanism, and supply piping that directs the agent to nozzles strategically positioned at heat sources in the kitchen.Kitchen Hood Suppression System Work?
A fire needs three things to thrive: oxygen, heat, and fuel. Once the system detects a fire, the nozzles above the appliance will discharge wet chemicals. These wet chemicals are engineered to quickly put out fires by covering the flames and starving them of oxygen. As soon as the system trips, the gas line to the appliance will also be immediately cut off, depriving the fire of fuel.
This two-pronged approach quickly puts out a kitchen fire without affecting other cooking stations. This means that you don’t lose all of the food being prepared in your kitchen, just the food that was burned in the fire. Since fires produce a lot of smoke, the hood automatically turns on to remove the smoke from your kitchen. Kitchen hood suppression systems respond automatically to fires, which minimizes loss.
If you’re looking for a code-compliant and cost-effective Kitchen Suppression solution for your application, we’d like to help. We will tailor a solution that fits your needs, no matter your size, complexity or line of business. From new installation to retrofit, freestanding or integrated, we will configure your system specifically for its environment — with thought given to ease of expansion or future upgrade.