NEW!
Addressable Detector Base
SDS12
To be base used with the Addressable Smoke Detector(SDS9030A),
Addressable Heat Detector(SDS9020A) & Addressable Smoke & Heat
Detector (SDS9036A) with I-PCB Approvals.
Related products
-
Landing Valves
Description:
Landing Valves are suitable for installation on dry riser in building for firefighting protection. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 Bar.
Disc facing rubber is replaceable type
Hand wheel is BLACK painted and body is RED
-
OS & Y Gate Valve
Description:
OS&Y gate valves operate by opening and closing via a gate, which lowers into or rises out of the valve.
Valve Standard: Conforms to AWWA C515/ BS5163
Working Pressure: 21 Bars/300PSI
Fusion Bonded Epoxy Coated Interior and Exterior RAL 3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
-
CO2 Fire Extinguishers
Description:
There are two commonly used fire extinguishers in the market. Part of fire safety and precaution is
knowing which fire extinguisher would be best for the possible fires that can occur in an establishment.
Carbon Dioxide extinguishers are primarily made of pressurized non-flammable carbon dioxide gas. CO2 extinguishers are easily recognizable since they have hard horns and does not have a pressure gauge. The extinguisher also contains a flexible hose attached to its hard horns. The pressure inside the cannister of the extinguisher is so high that dry ice may form when using the extinguisher. It also contains a valve with a safety release pressure to prevent any bursting of cylinders in situations of fires involving high temperatures. CO2 fire extinguishers should only be used for Class B fires, fires caused my flammable liquid, and Class C fires, fire that were triggered by faulty electrical wiring or circuitry. It is ideal to use in multi-risk fires. The main ingredient of the extinguisher, CO2, will extinguish the flames by displacing oxygen. The pressurized CO2 gas is also cold which also acts as a coolant to the burning fuels. It is important to note that CO2 extinguishers SHOULD NOT BE USED for Class A fires since the CO2 may not be enough to displace oxygen since materials that causes Class A fires can smolder and re-ignite. Laboratories, kitchens, mechanical rooms, rooms with flammable liquids are some establishments should be equipped with a CO2 extinguisher.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We are a leading expert in fire-safety systems and installation that would guarantee the safety of your establishment. We have a wide range of products for different fire-preventive measures needed, and we have the best and cost-effective CO2 extinguishers in UAE.
Related products
-
Emergency Lights – UL Listed
Description:
- Fluorescent single tube emergency light
- Working Voltage: AC220V±10%
- Battery: Nickel cadmium battery 3.6V 1.5Ah / 2.4V 4.0Ah
- Emergency duration time: 3 hours
- Working temperature: -10°C-55°C
- Working Humidity: 10% – 90%
- 1x8W T5 Fluorescent tube
- Product Size: 34. 6×10.6×7.9cm
-
Addressable Sounder
Description:
Providing two tones, Initiated by shorting External terminals, not affected by Loop power cut.
Polarity insensitive Signal Loop and Power Loop, with features of cable checking in case of power cut.
- Operation voltage: 24VDC Loop (16V-28V), 24VDC Power Supply
- Operation Current:
- Loop: Standby Current 1mA, Alarm current 5mA
- Power Supply: Standby Current 3mA, Alarm Current 50mA
- Sounder output: 94dB @ 1 Metre
- Polarized 2-core for loop and Polarized 2-core for loop
-
Water Extinguishers
Description:
Water Fire Extinguishers are effective on class A fire.
All Extinguishers are coated internally for optimal protection against rust and corrosion.
The valve is provided with safety release valve to release the excess pressure.
Cylinders of different capacity can be supplied upon request.
Water Fire Extinguishers are cost-effective
-
Fire Alarm Cable – UL Listed
Description:
Fire safety should not be taken lightly. Placing very high fire-safety preventive measures is important since it keeps people safe from danger and harm. It can also minimize the cost from damage recovery and prevent future costs due to possible lawsuits. It is as important to place a good effort in knowing what particular safety measures are needed to prevent fire-related accidents.
Fire alarm cables is one case as well. Since these cables are used for fire alarms and fire-preventive measures, these cables should be able to function while there is an ongoing fire. Installing regular wires may cause larger fires or worse can lead to accidents since these wires are not specially made for the situation. There are a lot of considerations needed especially if you want to ensure the proper installation of your fire alarm system in your establishment. Luckily, PHLOX Security & Safety Equip. LLC is here to help you with your fire-related equipment needs.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We also install fire-prevention alarms and systems and we have a wide range of products for different fire-preventive measures needed, and part of our product offerings are specialized fire alarm cables that are UL listed in UAE. Particularly, we offer Soloarti Fire Alarm Cables that can come in two dimensions:1.5 mm x 2 core x 100 meter and 1mm x 2 core x 100 meter. This particular fire alarm cable can withstand to temperatures up to 250OC and are halogen free in its composition. More importantly, these multicore cables are fire resistant and can maintain circuit integrity in high temperatures. It prevents smokes and noxious fumes from interfering with the internal circuitry of sensitive equipment lessening the potential damage by acid forming gases.- Soloarti Brand
- 1.5 mm x 2 core x 100 meter
- 1 mm x 2 core x 100 meter
- Halogen Free
- Withstand up to 250°C
-
Landing Valves
Description:
Landing Valves are suitable for installation on dry riser in building for firefighting protection. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 Bar.
Disc facing rubber is replaceable type
Hand wheel is BLACK painted and body is RED
-
Central Monitoring Battery System
Description:
Reliable and easy-to-operate central battery system constructed in accordance with the requirements.
The system monitors each output circuit individually and with the use of address modules – each luminaire.
- LCD display with easy-to-use menu
- Automatic test performing
- Automatic detection and adding luminaires to the system
- Monitoring of each luminaire
- Monitoring of each circuit
- Programming and configuration of the luminaires directly from the central unit