Description:
Landing Valves are suitable for installation on dry riser in building for firefighting protection. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 Bar.
Disc facing rubber is replaceable type
Hand wheel is BLACK painted and body is RED
Description:
This detector is extremely reliable for use in places that may have high dust levels or a smoky environment, making a normal smoke detector unsuitable.
Description:
Description:
Fire safety should not be taken lightly. Placing very high fire-safety preventive measures is important since it keeps people safe from danger and harm. It can also minimize the cost from damage recovery and prevent future costs due to possible lawsuits. It is as important to place a good effort in knowing what particular safety measures are needed to prevent fire-related accidents.
Fire alarm cables is one case as well. Since these cables are used for fire alarms and fire-preventive measures, these cables should be able to function while there is an ongoing fire. Installing regular wires may cause larger fires or worse can lead to accidents since these wires are not specially made for the situation. There are a lot of considerations needed especially if you want to ensure the proper installation of your fire alarm system in your establishment. Luckily, PHLOX Security & Safety Equip. LLC is here to help you with your fire-related equipment needs.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We also install fire-prevention alarms and systems and we have a wide range of products for different fire-preventive measures needed, and part of our product offerings are specialized fire alarm cables that are UL listed in UAE. Particularly, we offer Soloarti Fire Alarm Cables that can come in two dimensions:1.5 mm x 2 core x 100 meter and 1mm x 2 core x 100 meter. This particular fire alarm cable can withstand to temperatures up to 250OC and are halogen free in its composition. More importantly, these multicore cables are fire resistant and can maintain circuit integrity in high temperatures. It prevents smokes and noxious fumes from interfering with the internal circuitry of sensitive equipment lessening the potential damage by acid forming gases.
Description:
A check valve is probably in the discharge line of the pump.
It allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction.
Valve Standard: Conforms to AWWA C508, Clear waterway
Working Pressure: 21 Bars/300PSI
Fusion bonded epoxy coated RAL3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
Description:
Wet Chemical Extinguishers are effective on class A & F fires.
All extinguishers have been coated internally for optimum protection against rust and corrosion.
Non-toxic, non-corrosive, non-irritant and is harmless to humans and animals.
Contains No halogens, CFC’s or toxic products.
Wet Chemical extinguishers are manufactured in accordance with the requirements of International Standards.
Description:
Fire hose reels are designed and manufactured to BSEN 671-1:2001. The hose reels are manufactured from 1.5mm thick ribbed side plates for increased strength and coated with UV resistant Epoxy Powder Coating in Red, Stainless. The reel plate edge is rounded to prevent sharp edges. Hose made from natural rubber reinforced by double layer yarns. The outer and inner surfaces of the hose are smooth and seamless and can be withstand a pressure up to 20 bar.
The test pressure of the hose reel is 30 bar. The bursting pressure of the hose reel is 60 bar and above. The flexibility of the hose reel is high so that can be used without alterations for mounting with inlet to left or right of the reel.
The hose reel is fitted with specially designed glandless type drip proof seals which have been subjected to hydrostatic test pressure of 20 bar.
Steel hose reels can be supplied on request.
Description:
This detector is extremely reliable for use in places that may have high dust levels or a smoky environment, making a normal smoke detector unsuitable.
Description:
A check valve is probably in the discharge line of the pump.
It allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction.
Valve Standard: Conforms to AWWA C508, Clear waterway
Working Pressure: 21 Bars/300PSI
Fusion bonded epoxy coated RAL3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
Description:
The protector model P Deluge Valves is a quick opening hydraulically operated valve.
The valve may be actually manually (at the value location or remotely), hydraulically through the use of a wet pilot sprinkler, or electric type detector and/or electric control stations to actuate
PHLOX Security & Safety Equip. LLC
P.O. Box : 65433
Shed No. 4, Industrial Area 13
Sharjah, United Arab Emirates
PHLOX Security & Safety Equip L L C - Branch 01
Shop No. 1, Rashideya 3
Ajman, United Arab Emirates
We, PHLOX SECURITY & SAFETY EQUIP. LLC are glad to introduce ourselves as a supplier and we do installation of Fire Fighting and Fire Alarm materials and we are primarily located in Sharjah.
P.O. Box: 65433 ,Shed No. 4, Industrial Area 13 , Sharjah, United Arab Emirates