NEW!
Short-circuit Isolator
SDS9057A
Product Features:
• Automatically restores after short circuit clearance, minimizing
disruption.
• Mountable semi—flush or on surfaces.
• Single LED with 3600 viewing.
• Fast activation response, loop—powered.
• Low power consumption.
• Stable communication technique with high noise immunity.
• Comply with EN54-17, Certified by LPCB
Related products
-
Exit Light – UL Listed
Description:
Is Designed to be slim and lightweight, low power consumption, Low EMI and specially equipped with a customized propriety Hybrid IC and super bright white LED and longer life-span. Easy and Fast installation.
- Emergency Duration: 3 hrs
- Working Temperature: -10°C to 50°C
- White Aluminum alloy housing
- Transparent acrylic panel
- Innovative, Universal mounting
- Long life LED light source
- Working Voltage: AC120V/277V 60Hz
- AC Power: 5W
- Charging time: 24 hours
- Emergency Duration time: more than 3 hours
- Light source: LED 12 pcs
- Battery: Ni-CD 4.8V 650mAH
- Working Temperature: -10°C- 40°C
- Working Humidity: 90% RH
- Battery over discharge protection
- Charging LED Indicator and test button
- Installation: Wall side or ceiling mounting
-
Addressable Smoke Detector
Description:
There are certain situations that a smoke detector would not be enough in fire management and safety. In instances of smoldering fires, addressable smoke detectors would be the best choice. This smoke detector would be ideal for dense smokes of fires that were produced from the burning of soft furnishing, plastic, foam, or similar materials that easily smolders.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. In terms of fire safety and prevention, we are a leading expert and we also install fire-prevention alarms and systems. We have a wide range of products for different fire-preventive measures needed, and we, specifically, offer the GST DC-9103E Conventional Rate of Rise and Fixed Temperature Heat Detector.
The GST DC-9103E is a new generation product of GST that works stably by being fixed with a highly reliable fire judging program. It is also built with a microprocessor enabling a compact design. When detecting fire signals, it can change its own current to transmit the proper signal to the fire alarm control panel or the location of the addressable zone monitor unit. This smoke detector will keep illuminating fire LED until it is reset by its own system ensuring that the signal would be well received by people within the vicinity of the hazard.
Other unique features of the model are its programmable classes enabling up to 3 classes of program. It also has a reed switch testing. Its design is sleek and aesthetically pleasing allowing a low-profile and unobtrusive design that can easily complement any modern building. It is also electronically addressed and it comes with a remote indicator as its output terminal. The LED contained in the smoke detector also allows 360O viewing and smoke detection. Lastly, the product complies with EN 54-5. -
Check Valves
Description:
A check valve is probably in the discharge line of the pump.
It allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction.
Valve Standard: Conforms to AWWA C508, Clear waterway
Working Pressure: 21 Bars/300PSI
Fusion bonded epoxy coated RAL3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
Related products
-
CO2 Fire Extinguishers
Description:
There are two commonly used fire extinguishers in the market. Part of fire safety and precaution is
knowing which fire extinguisher would be best for the possible fires that can occur in an establishment.
Carbon Dioxide extinguishers are primarily made of pressurized non-flammable carbon dioxide gas. CO2 extinguishers are easily recognizable since they have hard horns and does not have a pressure gauge. The extinguisher also contains a flexible hose attached to its hard horns. The pressure inside the cannister of the extinguisher is so high that dry ice may form when using the extinguisher. It also contains a valve with a safety release pressure to prevent any bursting of cylinders in situations of fires involving high temperatures. CO2 fire extinguishers should only be used for Class B fires, fires caused my flammable liquid, and Class C fires, fire that were triggered by faulty electrical wiring or circuitry. It is ideal to use in multi-risk fires. The main ingredient of the extinguisher, CO2, will extinguish the flames by displacing oxygen. The pressurized CO2 gas is also cold which also acts as a coolant to the burning fuels. It is important to note that CO2 extinguishers SHOULD NOT BE USED for Class A fires since the CO2 may not be enough to displace oxygen since materials that causes Class A fires can smolder and re-ignite. Laboratories, kitchens, mechanical rooms, rooms with flammable liquids are some establishments should be equipped with a CO2 extinguisher.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We are a leading expert in fire-safety systems and installation that would guarantee the safety of your establishment. We have a wide range of products for different fire-preventive measures needed, and we have the best and cost-effective CO2 extinguishers in UAE. -
Addressable Sounder
Description:
Providing two tones, Initiated by shorting External terminals, not affected by Loop power cut.
Polarity insensitive Signal Loop and Power Loop, with features of cable checking in case of power cut.
- Operation voltage: 24VDC Loop (16V-28V), 24VDC Power Supply
- Operation Current:
- Loop: Standby Current 1mA, Alarm current 5mA
- Power Supply: Standby Current 3mA, Alarm Current 50mA
- Sounder output: 94dB @ 1 Metre
- Polarized 2-core for loop and Polarized 2-core for loop
-
Addressable Heat Detector
Description:
This detector is extremely reliable for use in places that may have high dust levels or a smoky environment, making a normal smoke detector unsuitable.
- Fixed temperature and rate of rise heat detection
- It is aesthetically pleasing with a low profile, unobtrusive design that will complement modern building designs.
- Electronically addressed
- Twin LED for 360º vision
- With Remote indicator output
-
OS & Y Gate Valve
Description:
OS&Y gate valves operate by opening and closing via a gate, which lowers into or rises out of the valve.
Valve Standard: Conforms to AWWA C515/ BS5163
Working Pressure: 21 Bars/300PSI
Fusion Bonded Epoxy Coated Interior and Exterior RAL 3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
-
Addressable Smoke Detector
Description:
There are certain situations that a smoke detector would not be enough in fire management and safety. In instances of smoldering fires, addressable smoke detectors would be the best choice. This smoke detector would be ideal for dense smokes of fires that were produced from the burning of soft furnishing, plastic, foam, or similar materials that easily smolders.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. In terms of fire safety and prevention, we are a leading expert and we also install fire-prevention alarms and systems. We have a wide range of products for different fire-preventive measures needed, and we, specifically, offer the GST DC-9103E Conventional Rate of Rise and Fixed Temperature Heat Detector.
The GST DC-9103E is a new generation product of GST that works stably by being fixed with a highly reliable fire judging program. It is also built with a microprocessor enabling a compact design. When detecting fire signals, it can change its own current to transmit the proper signal to the fire alarm control panel or the location of the addressable zone monitor unit. This smoke detector will keep illuminating fire LED until it is reset by its own system ensuring that the signal would be well received by people within the vicinity of the hazard.
Other unique features of the model are its programmable classes enabling up to 3 classes of program. It also has a reed switch testing. Its design is sleek and aesthetically pleasing allowing a low-profile and unobtrusive design that can easily complement any modern building. It is also electronically addressed and it comes with a remote indicator as its output terminal. The LED contained in the smoke detector also allows 360O viewing and smoke detection. Lastly, the product complies with EN 54-5.