NEW!
Addressable Manual Call Point Back Box
SDS-9060-BB
Product Features:
SDS9060A should comply with all local codes, NFPA70
National Electrical Code, BS5389 and EN54.Shown in Figure
2, the first one embedded box buried in the wall where the
SDS9060A and then fixed to the base of the embedded box.
Base dimensions of 90mm x 90mm x 6.5mm (Length x width
x height), mounting hole diameter Ø5mm, fixing hole spacing
is 60mm 62.5mm, line pipe from the base lower penetration
into the line shown in Figure.
Related products
-
Dry Powder Extinguishers
Description:
Fire safety and precaution is more than just installing fire extinguishers in your establishment. True fire preventive measure entails knowing which fire extinguisher is more suitable for your building. Having this particular knowledge maximizes the safety of everyone and can save multiple lives in the process. Dry Powder Extinguishers primarily contain the chemical monoammonium phosphate which is an extinguishing agent that can easily spread dousing over the flames in a split of time. Dry powder extinguishers are suitable for Class A, B, and C fires. Class A fires are those containing ordinary combustible materials such as cloth, wood, paper, and plastics. Class B fires are fires caused by flammable liquids such as grease, paint, and solvent. Class C fires are used are fires due to flammable gasses such as butane and methane. Dry powder extinguishers can be also used to extinguish fires due to live electrical wiring or equipment.
But apart from knowing what specific extinguisher should be used for a specific fire, it is important to know the external hazards as well. For example, it is not recommended to use dry powder extinguishers in enclosed spaces since it can be easily be inhaled by the people within the vicinity. Still confused? Do not worry PHLOX Security & Safety Equip. LLC is here and got you covered.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We also install fire-prevention alarms and systems and we have a wide range of products for different fire-preventive measures needed. We also provide our expertise and knowledge in recommending the best fire safety practices for your establishment that will guarantee everyone’s safety. We are one of UAE’s leading fire-prevention company and we attain this through supplying high-grade and quality products including dry powder extinguishers in the UAE. -
Exit Light – UL Listed
Description:
Is Designed to be slim and lightweight, low power consumption, Low EMI and specially equipped with a customized propriety Hybrid IC and super bright white LED and longer life-span. Easy and Fast installation.
- Emergency Duration: 3 hrs
- Working Temperature: -10°C to 50°C
- White Aluminum alloy housing
- Transparent acrylic panel
- Innovative, Universal mounting
- Long life LED light source
- Working Voltage: AC120V/277V 60Hz
- AC Power: 5W
- Charging time: 24 hours
- Emergency Duration time: more than 3 hours
- Light source: LED 12 pcs
- Battery: Ni-CD 4.8V 650mAH
- Working Temperature: -10°C- 40°C
- Working Humidity: 90% RH
- Battery over discharge protection
- Charging LED Indicator and test button
- Installation: Wall side or ceiling mounting
-
CO2 Fire Extinguishers
Description:
There are two commonly used fire extinguishers in the market. Part of fire safety and precaution is
knowing which fire extinguisher would be best for the possible fires that can occur in an establishment.
Carbon Dioxide extinguishers are primarily made of pressurized non-flammable carbon dioxide gas. CO2 extinguishers are easily recognizable since they have hard horns and does not have a pressure gauge. The extinguisher also contains a flexible hose attached to its hard horns. The pressure inside the cannister of the extinguisher is so high that dry ice may form when using the extinguisher. It also contains a valve with a safety release pressure to prevent any bursting of cylinders in situations of fires involving high temperatures. CO2 fire extinguishers should only be used for Class B fires, fires caused my flammable liquid, and Class C fires, fire that were triggered by faulty electrical wiring or circuitry. It is ideal to use in multi-risk fires. The main ingredient of the extinguisher, CO2, will extinguish the flames by displacing oxygen. The pressurized CO2 gas is also cold which also acts as a coolant to the burning fuels. It is important to note that CO2 extinguishers SHOULD NOT BE USED for Class A fires since the CO2 may not be enough to displace oxygen since materials that causes Class A fires can smolder and re-ignite. Laboratories, kitchens, mechanical rooms, rooms with flammable liquids are some establishments should be equipped with a CO2 extinguisher.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We are a leading expert in fire-safety systems and installation that would guarantee the safety of your establishment. We have a wide range of products for different fire-preventive measures needed, and we have the best and cost-effective CO2 extinguishers in UAE. -
Emergency Lights – UL Listed
Description:
- Fluorescent single tube emergency light
- Working Voltage: AC220V±10%
- Battery: Nickel cadmium battery 3.6V 1.5Ah / 2.4V 4.0Ah
- Emergency duration time: 3 hours
- Working temperature: -10°C-55°C
- Working Humidity: 10% – 90%
- 1x8W T5 Fluorescent tube
- Product Size: 34. 6×10.6×7.9cm
Related products
-
OS & Y Gate Valve
Description:
OS&Y gate valves operate by opening and closing via a gate, which lowers into or rises out of the valve.
Valve Standard: Conforms to AWWA C515/ BS5163
Working Pressure: 21 Bars/300PSI
Fusion Bonded Epoxy Coated Interior and Exterior RAL 3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
-
Wet Chemicals
Description:
Wet Chemical Extinguishers are effective on class A & F fires.
All extinguishers have been coated internally for optimum protection against rust and corrosion.
Non-toxic, non-corrosive, non-irritant and is harmless to humans and animals.
Contains No halogens, CFC’s or toxic products.
Wet Chemical extinguishers are manufactured in accordance with the requirements of International Standards.
-
Landing Valves
Description:
Landing Valves are suitable for installation on dry riser in building for firefighting protection. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 Bar.
Disc facing rubber is replaceable type
Hand wheel is BLACK painted and body is RED
-
Central Monitoring Battery System
Description:
Reliable and easy-to-operate central battery system constructed in accordance with the requirements.
The system monitors each output circuit individually and with the use of address modules – each luminaire.
- LCD display with easy-to-use menu
- Automatic test performing
- Automatic detection and adding luminaires to the system
- Monitoring of each luminaire
- Monitoring of each circuit
- Programming and configuration of the luminaires directly from the central unit
-
Check Valves
Description:
A check valve is probably in the discharge line of the pump.
It allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction.
Valve Standard: Conforms to AWWA C508, Clear waterway
Working Pressure: 21 Bars/300PSI
Fusion bonded epoxy coated RAL3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
-
CO2 Fire Extinguishers
Description:
There are two commonly used fire extinguishers in the market. Part of fire safety and precaution is
knowing which fire extinguisher would be best for the possible fires that can occur in an establishment.
Carbon Dioxide extinguishers are primarily made of pressurized non-flammable carbon dioxide gas. CO2 extinguishers are easily recognizable since they have hard horns and does not have a pressure gauge. The extinguisher also contains a flexible hose attached to its hard horns. The pressure inside the cannister of the extinguisher is so high that dry ice may form when using the extinguisher. It also contains a valve with a safety release pressure to prevent any bursting of cylinders in situations of fires involving high temperatures. CO2 fire extinguishers should only be used for Class B fires, fires caused my flammable liquid, and Class C fires, fire that were triggered by faulty electrical wiring or circuitry. It is ideal to use in multi-risk fires. The main ingredient of the extinguisher, CO2, will extinguish the flames by displacing oxygen. The pressurized CO2 gas is also cold which also acts as a coolant to the burning fuels. It is important to note that CO2 extinguishers SHOULD NOT BE USED for Class A fires since the CO2 may not be enough to displace oxygen since materials that causes Class A fires can smolder and re-ignite. Laboratories, kitchens, mechanical rooms, rooms with flammable liquids are some establishments should be equipped with a CO2 extinguisher.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We are a leading expert in fire-safety systems and installation that would guarantee the safety of your establishment. We have a wide range of products for different fire-preventive measures needed, and we have the best and cost-effective CO2 extinguishers in UAE.