SDSIOOO/addressable Fire Alarm
Control Mini Panel
Product Features:
• Single loop system with 120 points and 16 zone indicators.
• Convenient data/configuration import/export through the USB port.
• Network capability up to 20 panels through CAN connection.
• Easy cause and effect settings for fire alarms on both the control panel and PC.
• Comply with EN54-2/EN54-4, Certified by LPCB
Related products
-
Protector Deluge Valves
Description:
The protector model P Deluge Valves is a quick opening hydraulically operated valve.
The valve may be actually manually (at the value location or remotely), hydraulically through the use of a wet pilot sprinkler, or electric type detector and/or electric control stations to actuate
-
Check Valves
Description:
A check valve is probably in the discharge line of the pump.
It allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction.
Valve Standard: Conforms to AWWA C508, Clear waterway
Working Pressure: 21 Bars/300PSI
Fusion bonded epoxy coated RAL3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
-
Addressable Heat Detector
Description:
This detector is extremely reliable for use in places that may have high dust levels or a smoky environment, making a normal smoke detector unsuitable.
- Fixed temperature and rate of rise heat detection
- It is aesthetically pleasing with a low profile, unobtrusive design that will complement modern building designs.
- Electronically addressed
- Twin LED for 360º vision
- With Remote indicator output
-
Wet Chemicals
Description:
Wet Chemical Extinguishers are effective on class A & F fires.
All extinguishers have been coated internally for optimum protection against rust and corrosion.
Non-toxic, non-corrosive, non-irritant and is harmless to humans and animals.
Contains No halogens, CFC’s or toxic products.
Wet Chemical extinguishers are manufactured in accordance with the requirements of International Standards.
Related products
-
Protector Deluge Valves
Description:
The protector model P Deluge Valves is a quick opening hydraulically operated valve.
The valve may be actually manually (at the value location or remotely), hydraulically through the use of a wet pilot sprinkler, or electric type detector and/or electric control stations to actuate
-
Addressable Manual Call Point
Description:
- Optional Back box for surface mount
- Re-settable (non-Breaking glass) with special key
- Easy 1st and 2nd Fix Installation
- Semi Flush or surface mount installation
- Pleasing Style design
- Protection Rating: IP55
- Operating Voltage: 24V DC
- Operating Current:
- Stand by Current: 0
- Alarm Current: 30mA
-
OS & Y Gate Valve
Description:
OS&Y gate valves operate by opening and closing via a gate, which lowers into or rises out of the valve.
Valve Standard: Conforms to AWWA C515/ BS5163
Working Pressure: 21 Bars/300PSI
Fusion Bonded Epoxy Coated Interior and Exterior RAL 3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem
-
Fire Hose Reels
Description:
Fire hose reels are designed and manufactured to BSEN 671-1:2001. The hose reels are manufactured from 1.5mm thick ribbed side plates for increased strength and coated with UV resistant Epoxy Powder Coating in Red, Stainless. The reel plate edge is rounded to prevent sharp edges. Hose made from natural rubber reinforced by double layer yarns. The outer and inner surfaces of the hose are smooth and seamless and can be withstand a pressure up to 20 bar.
The test pressure of the hose reel is 30 bar. The bursting pressure of the hose reel is 60 bar and above. The flexibility of the hose reel is high so that can be used without alterations for mounting with inlet to left or right of the reel.
The hose reel is fitted with specially designed glandless type drip proof seals which have been subjected to hydrostatic test pressure of 20 bar.
Steel hose reels can be supplied on request.
-
Check Valves
Description:
A check valve is probably in the discharge line of the pump.
It allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction.
Valve Standard: Conforms to AWWA C508, Clear waterway
Working Pressure: 21 Bars/300PSI
Fusion bonded epoxy coated RAL3002
Flanged Ends: ANSI B16.1 Class 125/150/250, EN 1092-2 PN10/PN16
BS10 Table D/ Table E, Stainless Steel Stem