Fire Pumps
Fire Pumps Manufacturer in UAE
Fire pumps are an essential part of many water-based fire protection systems. They are used to increase the pressure (measured in psi and bar) of a water source when that source is not adequate for the system it is supplying.
These are commonly found in buildings that tend to have a high-pressure demand such as high-rises or storage warehouses.
Description:
Fire pumps are used to boost the water pressure in sprinkler and standpipe systems and to deliver the required amount of water.
- Easily access to all working parts
- Rugged construction
- Efficient Operation
- Self-Venting Design
- Dynamic balanced Impeller
- Performance and Hydrostatic test
- Space saving design
- Available in 50 or 60 Hz
- Also, Suction and discharge flanges are on a common center line.
Available Pumps Type:
End Suction Pump
Horizontal Split Case
At last PHLOX Security & Safety Equip LLC is a firefighting and fire alarm supplier based in Sharjah, UAE. Phlox also install fire-prevention alarms and systems.
We have a wide range of products for different fire-preventive measures needed.
Part of our product offerings is affordable and cost-efficient Fire Pumps Manufacturer in UAE.
It provides the highest quality and the best price of Fire Pumps and all types of extinguishers in UAE.
Related products
-
Water Extinguishers
Description:
Water Fire Extinguishers are effective on class A fire.
All Extinguishers are coated internally for optimal protection against rust and corrosion.
The valve is provided with safety release valve to release the excess pressure.
Cylinders of different capacity can be supplied upon request.
Water Fire Extinguishers are cost-effective
-
Dry Powder Extinguishers
Description:
Fire safety and precaution is more than just installing fire extinguishers in your establishment. True fire preventive measure entails knowing which fire extinguisher is more suitable for your building. Having this particular knowledge maximizes the safety of everyone and can save multiple lives in the process. Dry Powder Extinguishers primarily contain the chemical monoammonium phosphate which is an extinguishing agent that can easily spread dousing over the flames in a split of time. Dry powder extinguishers are suitable for Class A, B, and C fires. Class A fires are those containing ordinary combustible materials such as cloth, wood, paper, and plastics. Class B fires are fires caused by flammable liquids such as grease, paint, and solvent. Class C fires are used are fires due to flammable gasses such as butane and methane. Dry powder extinguishers can be also used to extinguish fires due to live electrical wiring or equipment.
But apart from knowing what specific extinguisher should be used for a specific fire, it is important to know the external hazards as well. For example, it is not recommended to use dry powder extinguishers in enclosed spaces since it can be easily be inhaled by the people within the vicinity. Still confused? Do not worry PHLOX Security & Safety Equip. LLC is here and got you covered.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. We also install fire-prevention alarms and systems and we have a wide range of products for different fire-preventive measures needed. We also provide our expertise and knowledge in recommending the best fire safety practices for your establishment that will guarantee everyone’s safety. We are one of UAE’s leading fire-prevention company and we attain this through supplying high-grade and quality products including dry powder extinguishers in the UAE. -
Emergency Lights – UL Listed
Description:
- Fluorescent single tube emergency light
- Working Voltage: AC220V±10%
- Battery: Nickel cadmium battery 3.6V 1.5Ah / 2.4V 4.0Ah
- Emergency duration time: 3 hours
- Working temperature: -10°C-55°C
- Working Humidity: 10% – 90%
- 1x8W T5 Fluorescent tube
- Product Size: 34. 6×10.6×7.9cm
Related products
-
Wet Chemicals
Description:
Wet Chemical Extinguishers are effective on class A & F fires.
All extinguishers have been coated internally for optimum protection against rust and corrosion.
Non-toxic, non-corrosive, non-irritant and is harmless to humans and animals.
Contains No halogens, CFC’s or toxic products.
Wet Chemical extinguishers are manufactured in accordance with the requirements of International Standards.
-
Foam Extinguishers
Description:
Foam Fire Extinguishers are effective on class A & B fire.
AFFF is an extinguishing agent which seals the burning surface against ignition.
All Extinguishers are coated internally for optimal protection against rust and corrosion.
A foam extinguisher is good for general use, suitable for the majority of business premises.
The valve provided with safety release valve to release the excess pressure.
-
Landing Valves
Description:
Landing Valves are suitable for installation on dry riser in building for firefighting protection. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 Bar.
Disc facing rubber is replaceable type
Hand wheel is BLACK painted and body is RED
-
Protector Deluge Valves
Description:
The protector model P Deluge Valves is a quick opening hydraulically operated valve.
The valve may be actually manually (at the value location or remotely), hydraulically through the use of a wet pilot sprinkler, or electric type detector and/or electric control stations to actuate
-
Addressable Smoke Detector
Description:
There are certain situations that a smoke detector would not be enough in fire management and safety. In instances of smoldering fires, addressable smoke detectors would be the best choice. This smoke detector would be ideal for dense smokes of fires that were produced from the burning of soft furnishing, plastic, foam, or similar materials that easily smolders.
PHLOX Security & Safety Equip. LLC is a fire fighting and fire alarms supplier based in Sharjah, UAE. In terms of fire safety and prevention, we are a leading expert and we also install fire-prevention alarms and systems. We have a wide range of products for different fire-preventive measures needed, and we, specifically, offer the GST DC-9103E Conventional Rate of Rise and Fixed Temperature Heat Detector.
The GST DC-9103E is a new generation product of GST that works stably by being fixed with a highly reliable fire judging program. It is also built with a microprocessor enabling a compact design. When detecting fire signals, it can change its own current to transmit the proper signal to the fire alarm control panel or the location of the addressable zone monitor unit. This smoke detector will keep illuminating fire LED until it is reset by its own system ensuring that the signal would be well received by people within the vicinity of the hazard.
Other unique features of the model are its programmable classes enabling up to 3 classes of program. It also has a reed switch testing. Its design is sleek and aesthetically pleasing allowing a low-profile and unobtrusive design that can easily complement any modern building. It is also electronically addressed and it comes with a remote indicator as its output terminal. The LED contained in the smoke detector also allows 360O viewing and smoke detection. Lastly, the product complies with EN 54-5.