Fire Extinguisher Service Vehicle
Special solution – mobile fire extinguisher service
We had projects when the customers asked us to install the skid into a very small space. Typical van. In these cases, we have to customize our solution. It could be useful to access underground garages with a limited height. The disadvantage of this solution is that:
- customized solution is more expensive
- limited space for other accessories
- you could use smaller CO2 cylinder
We just recommend this solution when there is a Hugh amount of fire extinguisher at a contracted partner. In this case you have to reach the areas anyway.
Standard solution- mobile fire extinguisher service
In the standard solution you have enough space for everything
- SKID
- CO2 gas cylinder. A regular 50-liter (37,5 kg CO2) cylinder height is 1650-1700 mm with valve
- fire extinguishing powder
- other accessories for maintenance
We like the regular solutions when there is no special need. The work is more comfortable in it. A good example on the vans or bus
Related products
-
Dry Powder Chemical Firefighting Systems
- Burner Fire Control manufactured Dry Chemical Systems are NOT limited by a “Selector Valve” for remote hose reels and monitors.
- Burner Fire Control patented expulsion systems enables each hose reel or nozzle to obtain chemical through independent discharge tubes giving instant discharge through pre-pressurization and a constant discharge rate on demand. With multiple discharge tubes that can be individually controlled, full or isolated discharges are possible.
- Dry Chemical Systems are in accordance with NFPA 17 Standard
- Dry Chemical System Vessels are designed and constructed in accordance to the latest ASME Section VIII, Div. 1 unfired pressure vessel code
- Dry Chemical Systems are made of materials suitable for marine environments.
- Vessels are constructed from carbon steel and applied with corrosion resistant pain system. Components are broken down to individual units prior to application of the corrosion resistant paint finish to ensure all surfaces receive the maximum protection possible.
- Systems are assembled with stainless steel, brass, and bronze hardware and fittings and these items are additionally protected applying corrosion resistant coatings to each item.
- The DCP carrier and expellant agent is nitrogen and cylinders are of DOT or ISO standard
- All Dry Chemical Systems are sold charged with the Agent potassium bicarbonate Purple-K
- Powder fluffing tube is installed in the Dry Chemical Tank
- Nitrogen cylinder valve is ‘‘Quick-Opening’’ type and is capable of being opened manually at the valve by means of hand wheel operation, or by ‘‘Quick-Opening’’ lever action (with pressure gauge)
- Nitrogen Cylinder Storage Racks are integrated parts of the skid mounted in Horizontal Positions. Nitrogen cylinders are secured with welded clamps. Nitrogen cylinders are removable from the operating position of the unit where controls for the operation are mounted.
- Guards are installed to protect the powder skids whenever skid areas may be affected by heat radiation from any risk.
- Dry Chemical Systems are specifically designed and selected to discharge the required extinguishing agent and flow time requirements
- Nozzles are specifically designed for use with dry chemical agents and selected to discharge the required extinguishing agent and flow time requirements
- Skid Welding is completed in accordance with AWS D.1.1 Structural Welding Code, Latest Edition.
-
Foam Master
Foam Master ideal for rapid deployment to flammable liquid fires & chemical spills. Foam tank made of stainless steel, externally powder painted (yellow color), and can be operated by one person.
Features
- Ideal for rapid deployment to flammable liquid fires & chemical spills.
- Externally powder painted (yellow color)
- Foam tank made of stainless steel.
- Can be operated by one person.
Specifications
-
- Product: Foam Master
- Capacity: 150, 200 and 300 liters
-
Clamping Device
Pneumatic clamping device for CO2- and powder extinguishers with pneumatic clamping cylinder.
TECHNICAL DATA model PT (No. 100 450) Dimensions (l x w x h) approx. 300 x 850 x 1000 mm Clamping surface (Ø) 80 – 220 mm Compressed-air 6 – 8 bar Color blue Optional available at extra charge:
- Equipped with adjustable clamping pressure (used for powder extinguisher)
-
Vehicle Suppression System
Firefighting Rescue Car
Rapid Intervention Vehicles are built on dual-axle vehicle chassis of UAE manufacturers with permanent all-wheel drive and dual tires. Tank contents are selectable with contents of up to 1,700 l. Additional systems, such as an optionally available dry powder units as well as CO2 systems, complete this series.
The vehicle types can be differentiated as follows:
- 2-door single cab for two persons
- 4-door double cab for five persons
The rear bank of seats can be fitted with stowage’s for the compressed air breathing apparatus system. Both engine variants, as well as the gasoline engine with 326 hp and the diesel engine with 300 hp can be selected,
Related products
-
Clean Agent Fire Suppression Systems
There are three common clean agent fire suppression systems to choose from, including FM-200, 3M™ Novec™ 1230, and Inergen Clean Agent Fire Suppression System. All systems use gases that are safe for the environment and humans, but they utilize different ways of suppressing a fire.
- The FM-200 system is stored as a liquid and vaporizes when discharged. The system displaces the oxygen around a fire, but heat absorption is its primary extinguishing capability.
- The Inergen system uses inert gases- nitrogen, argon, and carbon dioxide- to reduce the oxygen level and suppress the fire. While carbon dioxide is included, the concentration is safe for humans and the environment. Once the Inergen concentration is discharged, it returns to the atmosphere in its natural state.
- The 3M™ Novec™ 1230 system uses a liquid that is vaporized when discharged, similar to the FM-200 system. However, unlike the FM-200 which suppresses the fire by heat absorption or cooling, the 3M™ Novec™ 1230 displaces the oxygen around a fire to suppress it.
CO2 Fire Suppression Systems
If a building has rare or little occupancy, they may use a CO2 fire suppression system instead of a clean agent system. These systems are only used in buildings with very low occupancy, as carbon dioxide can result in health risks for anyone exposed, and can even be deadly. Clean agent systems are much more common, as they use gases they aren’t harmful to humans.
3 Main Parts Of The System
A clean agent fire suppression system is commonly made up of three parts: smoke detectors, the control panel, and notification devices. The smoke detectors work as usual and will detect a fire before it has time to escalate into an uncontrollable event. The smoke detector will send a signal to the control panel, which then alerts the notification devices and activates the release device to suppress the fire. The notification devices are there to warn occupants of the fire, and alert people in the area when the clean agent is about to be released.
-
Foam Bladder tank
Foam bladder tank is widely used in foam fire extinguishing system, such as chemical industrial enterprises, port and dock, large oil storage, airport oil storage, oil or fuel power plants, boiler room, dangerous goods storage, chemical warehouses and so on.
Foam bladder tank is made from tank, bladder, pressure-type proportioner, safety valves, control valves, level gauge and a lot of ancillary components.
The foam concentrate in the bladder can be used next time because it doesn’t contact with water.
Type of Proportioner: 1%, 3%, 6%.
Shape of tank: Horizontal or vertical.
Volume of tank: 500-15000L.
-
Foam Cabinet
Foam Cabinet is highly effective product for Gas Stations, Petrochemical Factories, Industrial Facilities, Warehouses and generally for all areas that protection is required due to fire Classes A and B.
- High Rates on A and B Fire Classes.
- Ergonomic design for easy use by one Operator.
- The top of the Cabinet is designed for outdoor mounting.
- Environmentally Friendly Foam.
Specifications & Contents
- Construction material: Galvanized Steel 1.2mm Electrostatic Paint RAL3000
- Hose Reel with arm Bracket
- Stainless Steel Pipe 2″ for Water Supply
- Brass Angle Valve 2″
- Foam Mixer with Flow rate 400lt / min with Aluminum Storz Couplings 2″
- Foam Suction Hose with Filter made of a rigid material.
- Foam nozzle 2″ with Aluminum Storz Couplings 2″.
- High Quality Hose 2 “, 30m, WP: 8Bar bounded with Aluminum Storz couplings 2”
- Two Foam Canisters 25lt
-
Water Fire Fighting System
Put on the back of a Ute or trailer and transport the Mobile Fire Fighting Skid where it is needed. To extinguish fires on your property or even water plants in during non-fire season.
It’s a 1000-liter IBC tank which is UV stabilized so it will last a fair few years out in sunlight. It has a fire hose reel with 30-meter hose on it with nozzle and fittings, and it’s 19 mil hose. The fire pump is a Davey 5155 firefighter, which has a Honda GX 160 5.5 horsepower engine. The base is approximately 2m long by about 1.1m wide and has been manufactured to hold the IBC tank, hose reel and the fire pump for easy lifting onto the back of a Ute or a trailer.
-
Fire Fighting Trailers
Features:
- Up-to 80 km/h on asphalt roads
- The pressure vessel is equipped with a mechanical safety valve
- The vessel is provided with valves for hose cleaning and pressure release after operation, preserving the residual amount of remaining powder
- The unit is provided ,with two lockers, one at each side. Each locker contains one 20 m length rubber hose
- The hoses are connected to two operating pistols that allow continuous or intermittent powder discharge
- Affords the highest extinguishing efficiency due to its special multipurpose Bavaria dry chemical powder (ABC)
-
Dry Powder Trolley
Wheeled Powder Fire Extinguisher 50KG is manufactured according to Directive 96/98/EC (MED) with modules B and D. As with portable extinguishers, wheeled units also have to comply with high standards to ensure their extinguishing capability (fire rating), quality and reliability. We at a.b.c. know how important it is to make the right choice in firefighting. Recently, a new European standard for wheeled extinguishers, EN 1866, was introduced. The a.b.c. wheeled extinguisher range has been the first in Europe to comply with this standard.
The wheeled units also carry the CE mark so the range can boast three quality guarantees: a.b.c. (ISO 9001), compliance with EN 1866 and the CE mark. The standard EN1866 defines important minimum levels of pressure retention, corrosion protection, operating temperatures and fire rating.